Программа и тематика Конгресса

ТЕМАТИКА КОНГРЕССА

ПЕРВАЯ СЕКЦИЯ МЕТАЛЛОВЕДЕНИЯ И ТЕРМООБРАБОТКИ:

Подсекции:

  • Фундаментальные основы термообработки

  • Термическая обработка сортовых сталей

  • Термическая обработка листовых сталей

  • Поверхностная термическая обработка

  • Индукционная обработка

  • Адитивная обработка

  • Цифровое моделирование процессов термообработки

  • Контроль качества процессов термообработки.

  • Термообработка цветных металлов и сплавов

ВТОРАЯ СЕКЦИЯ МЕТАЛЛОВЕДЕНИЯ И ХИМИКО-ТЕРМООБРАБОТКИ:

Подсекции:

  • Цементация и азотирование

  • Карбонитрирование и нитроцементация

  • Ионно-плазменная и электронно-лучевая обработка

  • Лазерная и высокоэнергетическая обработка поверхностей

  • Покрытия

  • Комбинированная обработка

  • Контроль процесса и моделирование ХТО


В рамках Конгресса в декабре 2018 г  в ЦНИИмермете проводится Международная конференция молодых ученых «Научное наследие Д.К. Чернова»

Тезисы докладов (устных и стендовых – до 1300 знаков) принимаются на английском языке до 1 марта 2019 г.

Доклады на русском и английском языках с синхронным переводом.


 

 

ПРОГРАММА КОНГРЕССА

17 сентября 2019 г.

  • Регистрация с 9.00
  • 10.00 Приветствия официальных лиц.
  • 10.30 Пленарные доклады
  • 14.30 Участие в 13-ой Международной специализированной выставке «Термообработка 2019»
  • Культурная программа

18 сентября 2019 г.

  • 9.00 – 17.00 Заседания параллельных секций
  • Стендовые доклады

19 сентября 2019 г.

  • 9.00 – 13.00 Заседания параллельных секций
  • Стендовые доклады
  • 13.00 Закрытие Конгресса
  • Культурная программа

26th IFHTSE CONGRESS 2019

 

September 17-19, 2019 – Moscow, Russia

 

PRELIMINARY PROGRAMME

 

LANGUAGE

 

The official language of the Congress will be English

 

Plenary Session

 

180 anniversary of D.K. Chernov: The effect of his discovery of iron polymorphism on the development of heat treatment processes of metals in the world

 

Arkadiy Tikhonov — Russian Society for Metal Science and Heat Treatment, Moscow, Russia

 

Case Hardening Steels: Challenging the invisible and outsmarting the unavoidable. An approach integrated along the process chain to new potentials in a mature technology Stefan Hock — International Federation for Heat Treatment and Surface Engineering, Italy

 

 

Yu. Lakhtin’s memorial lecture: Thermochemical surface engineering of stainless steels with interstitials; symbiosis of science, technology and innovation

Marcel A. J. Somers — Technical University of Denmark, Lyngby, Denmark

 

The electron beam can do more than surface hardening

 

Rolf Zenker, Anja Buchwalder — TU Bergakademie Freiberg, Germany

 

Monograph Presentation

 

Metallurgy and heat treatment in the automotive industry

 

Arkadiy Tikhonov — Russian Society for Metal Science and Heat Treatment, Moscow, Russia

 

 

 

  1. Section of Heat Treatment

 

I.A. – I.B. Structure and properties

 

Steels for high temperature applications

 

Zixin Huang, Harry BhadeshiaUniversity of Cambridge, Cambridge, United Kingdom

 

Martensite formation in D2 steel at cryogenic temperatures

 

  1. Villa, Marcel A.J. Somers — Technical University of Denmark, Kgs. Lyngby, Denmark

 

Relaxation of residual stress and high temperature fatigue strength of shot peened 17-4PH at elevated temperature

 

Liu Ming-xia, ChangGeng-rong, Liu Dao-xin, Dai Jun, Zhang Yunliang, XuKe-wei — Xi’an University, Shaanxi Province, China

 

Influence of accelerated spheroidisation on quenching process and resultant mechanical

 

properties in spring steel 54SiCr6

 

J.Kotous, J.Dlouhý, D.Nacházelová — COMTES FHT a.s., Dobrany, Czech Republic

 

The principles of creating new economically alloyed ferritic steels with a unique complex of difficult to combine properties

 

A.I. Zaitsev, A.V. Koldaev, A.B. Stepanov, N.A. Arutyunyan, S.F. Dunaev — Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet), Moscow, Russia Chemical Faculty, Lomonosov Moscow State University, Moscow, Russia

 

Effect of boundary heat flux transients on thermal field in Inconel and Steel probes during quenching

 

  1. M. PraneshRao, K. Narayan Prabhu — National Institute of Technology Karnataka, SrinivasnagarSurathkal Mangalore Karnataka, India

 

Effect of heat treatment on microstructure and mechanical properties of 9Cr-WVTiN reduced activation martensitic steels

 

JinpingSuo, JuexinXu, Hui Lu, GaoyonXu — Huazhong University of Science and Technology, Wuhan, China

 

Evolution of microstructure and wear Properties of silicon manganese brass under different heat treatment conditions

 

Dai Jiaoyan,Bao Mingdong, Wang Shimin, Wang Ruilai, Xu Xuebo,Tian Wu, XuJinfu — Ningbo University of Technology, Ningbo, China

 

Ningbo ZycalloyCo.,Ltd, Ningbo, China

Taiyuan University of Technology, Taiyuan, China

 

New process of steel heat treatment: design, microstructure, properties and applications W. Swiatnicki, K.Wasiak, K. Wasiluk, S. Marciniak, E. Skołek, M. Węsierska, M. Bagrowska, A.Wieczorek — Warsaw University of Technology, Warszawa, Poland NanoStal Ltd., Kielce, Poland

 

Silesian University of Technology, Gliwice, Poland

 

Neutron diffraction study of the process of low-temperature martensite decomposition of hardened medium-carbon steel

А.А. Alekseev — Tula State University, Tula, Russia

 

Correlation between mechanical and acoustic properties of low-carbon steel at tension А.V. Levina, V. P. Levin, L. R. Botvina — A.A. Baikov Institute of Metallurgy and Materials Science of the Russian Academy of Sciences, Moscow, Russia

 

Prediction of the durability of metal structures based on the analysis of their microstructure

 

S.N.Solovov, A.I.Gnevko, O.E.Zubov, M.V.Mukomela, A.I.Chmihalo, V.A.Yanushkevich-The Military Academy of Strategic Rocket Troops after Peter the Great, Moscow region, Balashikha, Russia

 

 

 

 

 

 

 

I.C. New technologies of heat treatment

 

Effect of temperature and catalyst on the oxidation of oil used for the Mar-tempering of Gears

 

  1. Scott MacKenzieHoughton International, Inc., USA Pedro LuizPioli — Houghton Brasil Ltda., Sao Paulo, Brazil

 

Increase of lifetime for blanking tools made of steel

 

  1. ClausSirris, Ghent, Belgium
  2. Demmler — Fraunhofer Institute IWU, Chemnitz, Germany
  3. Weber — Fraunhofer Institute IST,Braunschweig, Germany

 

On the influence of deep cryogenic treatment on tempering transformations in AISI D2 steels

 

  1. Pellizzari, V.Menegante — Universityof Trento, Trento, Italy
  2. Villa, Marcel A. J. Somers — Technical University of Denmark, KongensLyngby, Denmark

 

Heat treatment with intercritical heating of ductile iron

 

  1. NawrockiInstitute of Precision Mechanics, Warsaw, Poland

 

Deep cryogenic treatment of high speed steels

 

P.Jovičević Klug, B. Podgornik — Institute of Metals and Technology, Ljubljana, Slovenia

 

Vacuum heat treatment of as cast high-speed steel of M2 type

 

A.S. Chaus, M. Bračík, M. Sahul, M. Dománková— Slovak University of Technology in Bratislava,Trnava, Slovakia

 

I.D. Additive manufacturing

 

Main benefits of heat treatments and HIP for metal parts made by additive manufacturing J.Patrick — BODYCOTE, Pusignan, France

 

Investigation of structure and properties from aluminum matrix composite materials produced by selective laser melting

 

  1. Ableyeva, T. Tarasova, G. Gvozdeva — Moscow State University of Technology Stankin, Moscow, Russia

 

Ion vapor deposited coating impoved corrosion protection for AM parts practical applications

 

  1. Kowalewski — Ipsen Inc., Illinois, USA

 

Ultrasonic surface treatment of components produced by additive manufacturing technologies

 

S.K. Sundukov, D.S. Fatyukhin, A. A. Volkov — Moscow Automobile and Road Construction State Technical University (MADI), Moscow, RF

 

Submicron structure formation at selective laser melting of WC-Co

 

A.V. Gusarov, R.S. Khmyrov, P.A. Podrabinnik, T.V. Tarasova — Moscow State Technological University STANKIN, Moscow, Russia

 

 

I.E. Processes modeling and simulation

 

Simulation of low-pressure carburizing with acetylene for industrial applications T.Waldenmaier, H. Autenrieth— Robert Bosch GmbH, Renningen, Germany

 

Acetylene decomposition during low pressure carburization treatment: modelling and optimization of the process

 

E.Vyazmina, G. Mougin,J. Sheng — Air Liquide, Paris-Saclay Research Center, France L. Coudurier — Air Liquide, Technology Center, Germany

 

  1. Januard — Air Liquide, Paris, France

 

Semi-analytical evaluation of the heat generated by induction heating for hardening applications

 

  1. Areitioaurtena, U. Segurajauregi, I. Urresti— IK4-Ikerlan Technology Research Centre, Mechanics Area,Arrasate-Mondragón, Spain.

 

  1. Villar- IK4-Ikerlan Technology Research Centre, Power Electronics Area, Arrasate-Mondragón, Spain

 

  1. Ukar — University of the Basque Country, Bilbao, Spain

 

Distortion of a fixture hardened planet gear blank– a finite element simulation study H.Birkhofer, T. Lübben — Leibniz-Institut für Werkstofforientierte Technologien IWT, Bremen,

 

Germany

 

  1. Taylor — Aerospace Transmission Technologies – ATT, A Joint Company of Liebherr-Aerospace and Rolls-Royce, Friedrichshafen, Germany

 

Prediction transient HTC by using universal function approximator

 

  1. Szénási, Z. Fried, M. Seebauer, I. Felde — Óbuda University, Budapest, Hungary

 

Identification of heat transfer coefficients and simulation of quenching distortions on disk probe

 

HideoKanamori — Graduate School of Saitama Institute of Technology, Saitama, Japan Dong-Ying Ju — Advanced Science Institute, Saitama Institute of Technology, Saitama, Japan

 

I.F. Quality control

 

Application of different measuring techniques for characterization of quenching processes in water based polymer solutions

 

  1. Frerichs, T. Lübben — Leibniz Institute for Materials Engineering, IWT Bremen, Bremen, Germany

 

The application of instrumented indentation test for express control of the physical and mechanical properties of the materials surface layers after various types of treatment V.M. Matyunin, A.Y. Marchenkov, A.L.Goncharov, N. Abusaif — National Research University “Moscow Power Engineering Institute”, Moscow, RF

 

Deviation in heat treatment and resulting measurement uncertainty for AA 6xxx Al alloys B. Podgornik, B. Žužek, F. Vode- Institute of Metals and Technology, Ljubljana, Slovenia B. Hostej, V. Kevorkijan— IMPOL R&R d.o.o., SlovenskaBistrica, Slovenia

 

Measurement of cooling curves and visualization of boiling phenomenon on disk probe Hideo Kanamori — Graduate School of Saitama Institute of Technology, Fusaiji, Fukaya, Saitama, Japan

 

Tsuyoshi Sugimoto — Nissan Motor Co., Ltd., Okatsukoku, Atsugi, Kanagawa, Japan; and Department of Engineering, Saitama Institute of Technology, Fuseiji, Fukaya, Saitama, Japan Riki Homma- Lubricants Research Laboratory of Idemitsu Kosan Co., Ltd, Anesakikaigan, Ichihara, Chiba, Japan

 

Dong-Ying Ju — Advanced Science Institute, Saitama Institute of Technology, Fusaiji, Fukaya, Saitama, Japan

 

Controlling the structure and properties of cold-rolled mill products made of light alloyed steel (HSLA type) subjected to continuous annealing

 

I.G. Rodionova, O.N. Baklanova, A.A. Pavlov, N.A. Karamysheva — Research Institute of Ferrous Metallurgy (TsNIIchermet), Moscow, Russia A.S. Melnychenko — NUST MISIS, Moscow, Russia

 

S.V. Denisov, V.E. Telegin, S.G. Andreev, A.V. Mastyaev — PJSC Magnitogorsk Iron and Steel Works, Magnitogorsk, Chelyabinsk region, Russia

 

 

  1. Section of Thermo-Chemical Treatment A-II.B-II.C Thermo-chemical treatment

 

Ecological and practical process comparison of plasma and gas nitriding for users T. Müller — RÜBIG Industrial Furnaces, Wels, Austria

 

Nitrided gears engineering: bending fatigue strength prediction from process parameters S.Thibault, S.Gourdin — Safran Tech, Materials & Process Department, Magny-les-Hameaux,

France

 

  1. Argoud— Safran Tech, Materials&ProcessDepartment, Magny-les-Hameaux, France; LAMPA, Angers, France

 

Influence of stainless steel material quality on low temperature surface hardening U. Oberste-Lehn, Andreas Karl, Alexandra Friedrich — Bodycote, Düsseldorf, Germany

 

Low-temperature liquid boronizing of structural steels

 

S.G. Tsikh, V.N. Skorobogatykh — «NPO «CNIITMASH», Moscow, Russia

А.А. Krasulya, A.S. Pomelnikova — Bauman Moscow State Technical University, Moscow,

 

Russia

 

K.D. Polinovsky — «ITSU», Moscow, Russia

 

Possibility of nitriding treatment of Si under N2 atmosphere purified by CaSi2

 

Tsuyoshi Saito, Ryota Gemma — Department of Materials Science, School of Engineering, Tokai University, Hiratsuka, Kanagawa, Japan

 

«Bespoke» compound layers for fretting response optimization R. Guiheux— Safran Transmissions Systems, Colombes, France

 

  1. Arnaud,E. Hériprée,V. Aubin —MSSMAT, CNRS, CentraleSupélec, Université Paris-Saclay, Gif-sur-Yvette, France

 

  1. Laporte, S. Fouvry — LTDS, Lyon, France

 

  1. Skiba,G. Michel — Institut de Recherche Technologique M2P, Metz, France C. Dannoux — ALD France, Moirans, France

 

  1. Branger — Naval Group Research, Nantes, France

 

Heat Treatment in active fluidized bed

 

  1. Babul— Institute of Precision Mechanics, Warsaw, Poland

 

Effect of AlN particle size on abnormal grain growth during carburization NaohideKamiya, Yuuki Tanaka, Keisuke Inoue— Daido Steel Co.,Ltd., Daido-cho, Minami-ku, Nagoya, Aichi, Japan

 

High-temperature solution nitriding of martensitic stainless steel

 

C.Tibollo, M. Villa, T.L. Christiansen, M.A.J. Somers— Technical University of Denmark, KongensLyngby, Denmark

 

Boron-based composite diffusion layers for operational improvement of dies

 

  1. Mishigdorzhiyn — East Siberia State University of Technology and Management, Ulan-Ude, Russia

 

  1. Ulakhanov — East Siberia State University of Technology and Management, Ulan-Ude, Russia

 

Effect of formation of complex carbideon stainless steel layer by thermochemical reaction

 

Sang-Gweon Kim, Kuk-Hyun Yeo, Jae-Hoon Lee, Yong-Ki Cho — Heat Treatment Technology R&BD Group, Korea Institute of Industrial Technology,Seohaean-ro, Siheung-si, Gyeonggi-do, R.O.Korea

 

Masahiro Okumiya- Toyota Technological Institute, Hisakata, Tempaku, Nagoya, Japan

 

Research for heat treatment simulation on hyper carburizing process considering with diffusion of alloy elements

 

Tsuyoshi Sugimoto — Nissan Motor Co., Ltd., Takara-cho, Kanagawa, Yokohama, Kanagawa, Japan; Saitama Institute of Technology, Fuseiji, Fukaya, Saitama, Japan

 

Dong-Ying Ju — Saitama Institute of Technology, Fuseiji, Fukaya, Saitama, Japan

 

II.D: Combined processes

 

The tribological properties of the heat resistant steel after a complex thermo-chemical treatment

M.Yu.Semenov, A.E.Smirnov, A.S.Mokhova, A.P.Alekhin— Bauman Moscow State Technical University, Moscow, Russia

 

A novel thermal processing & coating method for enhancing the tribological properties of treated components

B.Zhmud, J.Blomkvist — Applied Nano Surfaces,Uppsala, Sweden M. Fällström — Bodycote Värmebehandling, Sweden

 

Effect of combined gas nitriding and deep cryogenic treatment on wear behaviour of AISI D2 steel

  1. Hradil, M. Duchek, M. Šugár — COMTES FHT a.s., Dobrany, Czech Republic P. Nawrocki — Institute of Precision Mechanics, Warsaw, Poland

 

Improving the efficiency of thermochemical treatment using ultrasound

 

V.M. Prikhodko, D.S. Simonov, L.Y. QeblawiMoscow Automobile and Road Construction State Technical University (MADI), Moscow, RF

 

Features of boronized layers formation on pre-cemented steels

 

M.S.Tsikh, A.A. Krasulya — Bauman Moscow State Technical University, Moscow, Russia

 

  • Mironova, A.D. Metlyakov — Perm State University, Perm, Russia

 

II.E. Plasma, laser, and electron beam processes

 

Microstructure and tribological properties of expanded austenite phase formed in austenitic stainless steels by active screen DC plasma low-temperature carburizing Youichi Watanabe, Haruna Ishizuka, KosukeTakamura, Weibo Li — Nihon Parkerizing Co., Ltd., Nihonbashi, Chuo-ku, Tokyo, Japan

 

Nobuhiko Satomi — Parker Trutec Inc., Springfield, Ohio, USA

Nobuyuki Kanayama — SentierGiken Co., Ltd., Hokuryocho, Matsue-shi, Shimane, Japan

 

Surface hardening of steel with nanocarbon materials during laser and electron-beam treatment

 

O.V.ChudinaMoscow Automobile and Road Construction State Technical University (MADI), Moscow, RF

 

A.V.Eletsky, E.V. Terentyev — National Research University “Moscow Power Engineering Institute”, Moscow, RF

 

Characterization of Al2O3/TiAlN/TiNmultilayer coatings prepared by pulsed DC plasma-enhanced chemical vapor deposition

 

Kazuki Kawata, Toru Kidachi — Oriental Engineering Co., Ltd. Research and Development Division, Kawagoe-city, Saitama, Japan

 

Effects of different types of Discharge on thermo-chemical processes of structural and tool steels

 

A.S. Sergeeva, L.G. Petrova, V.A. Aleksandrov — Moscow Automobile and Road Construction State Technical University (MADI), Moscow, RF

 

V.M. Vdovin —“Lavochkin Association”,Moscow, RF

 

Synthesis of B-Al composite coatings by electron-beam alloying and combined treatment

 

  1. Mishigdorzhiyn — East Siberia State University of Technology and Management, Ulan-Ude, Russia

 

II.F. Coatings and films

 

The effect of Y2O3 on aluminide coating formation on a nickel -based alloy

 

  1. Shahriari Nogorani, F. Ebadi — Department of Materials Science and Engineering, Shiraz University of Technology, Shiraz, Iran

 

The formation composite coatings of steel items by the copper-containing nanoparticles

 

  1. A. Aleksandrov, I.Yu. Isayev, I.V. Odinokova, G. Yu. Ostaeva — Moscow Automobile and Road Construction State Technical University (MADI), Moscow, Russia

 

Characterization of VC coatings produced by thermo-reactive diffusion

 

  1. A. Elhelaly, M. A. El-Zomor, M. H. Ahmed — Heat treatment department, Tabbin Institute for Metallurgical Studies, Cairo, Egypt

 

  1. M. Okasha — Metallurgy Lab, Quality Sector, Helwan Engineering Industries Company, Cairo,

 

Egypt

 

Electroplating on the surface of steels after ultrasonic treatment

 

  1. Bringulis, O.V. Chudina, — Moscow Automobile and Road Construction State Technical University (MADI), Moscow, RF

 

Microstructure and corrosion behavior of DLC films deposited on SUS316L and titanium substrate for bipolar plates

 

Beibei Han — Department of Electronic Engineering, Graduate School of Engineering, Saitama Institute of Technology, Fusaiji, Fukaya, Saitama, Japan

 

DongyingJu — Advanced Science Institute, Saitama Institute of Technology, Fusaiji, Fukaya, Saitama, Japan; State Power Investment Corporation, Xicheng District, Beijing, China Hangzhou Dianzi- University, Jianggan District, Hangzhou, China

 

Susumu Sato — Department of Electronic Engineering, Graduate School of Engineering, Saitama Institute of Technology, Fusaiji, Fukaya, Saitama, Japan

 

Maorong Chai — Advanced Science Institute, Saitama Institute of Technology, Fusaiji, Fukaya, Saitama, Japan; State Power Investment Corporation, Xicheng District, Beijing, China

 

 

 

POSTER SESSION

 

Influence of ultrasonic cavitation on Armco iron submicrogeometry

 

S.K. Sundukov, V.M. Prikhodko, B.A. Kudryashov — Moscow Automobile and Road Construction State Technical University (MADI), Moscow, RF

 

Influences of heat treatment and surface on thermal fatigue

 

R.Ribeiro da Silva Junior — University of Sao Paulo, Materials Engineering Department, Sao Carlos, SP, Brazil

 

  1. E. Totten — Portland State University, Department of Mechanical and Materials Engineering, Portland, OR, USA

 

Lauralice de Campos F. Canale-University of Sao Paulo, Materials Engineering Department, Sao Carlos, SP, Brazil

 

Combined surface modification of steel by zinc coating and nitriding L. G.Petrova, P. E.Demin, A. V.Kosachev, and G. Yu.Timofeeva

 

  • Moscow Automobile and Road Construction State Technical University (MADI), Moscow, RF

 

Influence of contact surfaces on the properties of the two-pivotal systems

 

А.Neverov, I. Sergeev — Moscow Automobile and Road Construction State Technical University (MADI), Moscow, RF

 

Nitriding of High-Alloyed Steels for aviation parts reliability improvement P.S.Bibikov — Moscow Aviation Institute (National Research University) , Moscow, RF

 

I.S. Belachova — Moscow Automobile and Road Construction State Technical University (MADI), Moscow, RF

 

S.P. Bibikov — JSC „Nitrid”, Saratov, RF

 

Study of surface strengthened machine parts during auto-technical expertise A.Yu. Malakhov,T.E. Likhacheva, A.E. Perekrestov — Moscow Automobile and Road Construction State Technical University (MADI), Moscow, RF

 

Effect of Hot Forging on Creep Properties of Cast High Cr Based Steel Doryun Lee, Dongjun Mun — POSCO, Pohang city, South Korea

 

Effect of nitriding potential and temperature on surface phase after austenitic nitriding in JIS-S25C steel

 

Yasushi Hiraoka — Parker Netsusyori Kogyo Co.,Ltd., Kawasaki, Japan Youichi Watanabe — Nihon Parkerizing Co.,Ltd., Nihonbashi, Japan

 

New technology of hardening the working surface of large stamps for sheet metal parts using hard chrome-plating in the electrolyte canal

 

A.A. Chervyakov, A.V. Chikurov, A.K.Tikhonov

 

 

Effect of the bombardment bias on the optical transmittance properties of sputtering deposited Pd/Mg-Y alloy thin films

 

Bao Mingdong, Xu Xuebo, Liu Yue — School of Materials and Chemical Engineering, Ningbo University of Technology, Ningbo; School of Materials Science and Engineering, Shanghai Jiaotong University, Shanghai, China

 

Chen Juan — School of Materials Science and Engineering, Shanghai Jiaotong University, Shanghai, China

 

The effect of heat treatment on the impact toughness of structural steel subjected to severe plastic deformation

 

A.M. Ivanov, N.D.Kovalenko — V.P. Larionov Institute of Physical-Technical Problems of SB of the RAS, Yakutsk, Russia

 

Ways of ultrasonic additive manufacturing development

 

D.S. Fatyukhin, R.I. Nigmetzyanov, A.V. Sukhov — Moscow Automobile and Road Construction State Technical University (MADI), Moscow, RF

 

The combination of ultrasonic hardening and nitriding

 

R.I. Nigmetzyanov, S.K. Sundukov, V.A. Perekrestova — Moscow Automobile and Road Construction State Technical University (MADI), Moscow, RF

 

The effect of reactive elements on the formation and hot corrosion performance of aluminide coating

  1. Shahriari Nogorani,F. Fatemi — Department of Materials Science and Engineering, Shiraz University of Technology, Shiraz, Iran

 

Development of the basics of complex production technologies of a new generation of cold-rolled low carbon and ultra low carbon steels with an improved set of properties

 

A.V. Koldaev, I.G. Rodionova, A.B. Stepanov — Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet), Moscow, Russia

 

A.I. Zaitsev, S.V. Denisov, V.E. Telegin— PJSC Magnitogorsk Iron and Steel Works, Magnitogorsk, Chelyabinsk region, Russia

 

 

Measurement of cooling curves and visualization of boiling phenomenon on cylinder probe

 

Hideo Kanamori — Graduate School of Saitama Institute of Technology, Fusaiji, Fukaya, Saitama, Japan

 

Tsuyoshi Sugimoto — Nissan Motor Co., Ltd., Atsugi, Kanagawa, Japan; and Department of Engineering, Saitama Institute of Technology, Fuseiji, Fukaya, Saitama, Japan

 

Riki Homma — Lubricants Research Laboratory of Idemitsu Kosan Co.,Ltd, Ichihara, Chiba, Japan

 

Dong-Ying Ju — Advanced Science Institute, Saitama Institute of Technology, Fusaiji, Fukaya, Saitama, Japan

 

Production prospects of heat-treated wire for suspension springs and steels with a two-phase ferrite-martensite structure for cold-heading of fasteners in Russia

 

  • Sorokin — JSC«BelZAN», Belebey, Bashkortostan, Russia

 

The role of cavitation clusters in ultrasonic liquid processing

 

D.S. Fatyukhin, R.I. Nigmetzyanov, A.E. Perekrestov — Moscow Automobile and Road Construction State Technical University (MADI), Moscow, RF

 

Controlling the structure and properties of cold-rolled mill products made of dual-phase ferritic martensitic steel (DPFMS type) subjected to continuous annealing

 

I.G. Rodionova, O.N. Baklanova, A.A. Pavlov, N.A. Karamysheva — Federal State Unitary Enterprise (FSUE) I.P. Bardin Central Research Institute for Ferrous Metallurgy, Moscow, Russian Federation

 

A.S. Melnychenko — National University of Science and Technology “MISIS”, Moscow, Russian Federation

 

S.V. Denisov, V.E. Telegin, S.G. Andreev, A.V. Mastyaev — PJSC “Magnitogorsk Iron & Steel Works”, Magnitogorsk, Chelyabinsk Region, Russian Federation

 

Investigation of the steel structure 15Kh11MF-Sh depending on the thermo-defomation parameters of treatment, investigation of the characteristics of large-sized stamped blanks of turbine blades

 

T.A.Chizhik, M.O.Smirnov, I.N.Tsybulina — PJSC «Power machines», Saint Petersburg, Russia A.M. Zolotov — Peter the Great St. Petersburg Polytechnic University, Saint Petersburg, Russia

 

  • возможности образования нитридов циркония на поверхности аморфного сплава Zr46Cu46Al8 при воздействии лазерного излучения

 

А.А. Шлыкова, В.А. Федоров, А.М. Подкауро — Тамбовский государственный университет им. Г.Р. Державина, г. Тамбов, Россия

 

Fracture toughness and microrelief of specimens from stainless steel with ultrafine-grained structure

 

  1. N. Beletskiy, M. R. Tyutin, L. R. Botvina — A.A. Baikov Institute of Metallurgy and Materials Science of the Russian Academy of Sciences, Moscow, Russia

 

U.S. Perminova — JSC «Kompozit», Moscow region, Korolev, Russia

 

Benefits and properties of laser-hardeninig

 

  1. Němeček — RAPTECH s.r.o., Zruč-Senec, Czech Republic

I.Černý, J. Kec — SVÚM Praha, Praha, Czech Republic

 

  1. Ganev, J.Čapek — ČVUT Praha, Praha, Czech Republic

 

Influence of thermo treatment on the dislocation substructure and photocatalytic properties of ZnO

 

I.M. Sosnin, A.E. Romanov — Togliatti State University, Togliatti, Russia; University ITMO, Saint Petersburg, Russia

 

A.A.Vikarchuk — Togliatti State University, Togliatti, Russia

 

Heat treatment of copper containing disclination type defects

 

А. А. Vikarchuk, N. N. Gryzunova, A.M.Gryzunov — Togliatti State University, Togliatti, Russia

 

Recognition of subfilm corrosion of metal surfaces of machine parts with various coatings by infrared thermography

 

E.A. Kosenko, V.A. Zorin, N.I. Baurova — Moscow Automobile and Road Construction State Technical University (MADI), Moscow, RF

 

Использование металлополимерных материалов в машиностроении

 

А.А. Рискулов, Х.А. Шарифходжаева — Ташкентский институт по проектированию, строительству и эксплуатации автомобильных дорог, Ташкент, Узбекистан

Задайте свой вопрос